- Joined
- 8 Sep 2004
- Messages
- 111
- Reaction score
- 0
- Country
Got all the copper pipework connected up for my mates new bathroom. All totally watertight except for one bloody 22mm/15mm reducer which is still not quite managing to stay dry. It is screwed into a 22mm bent connector and its male thread is wrapped in PTFE as advised by the bloke in the plumbers' merchants.
Any advice on how this albeit tiny leak might be tackled? Any ideas as ever greatly appreciated.
Any advice on how this albeit tiny leak might be tackled? Any ideas as ever greatly appreciated.