What's the hardest part about using Acrow props

Joined
12 Aug 2021
Messages
1
Reaction score
0
Country
United Kingdom
Hi , am new here :))
I'm going to be using Acrow props for a project soon for the first time but I've been told things about people fighting with them - struggling to adjust the final height etc., is it really that bad? I had a look into alternatives (brick brace etc.) but they are just so expensive..
Thanks,
From Squaky
 
Sponsored Links
Depends what you're propping. Trying to lift stuff (eg a bowing ceiling) with acros is hard work-better making a tee with some 4 x 2 and using a car jack to do the lift (follow it with the acro every 5mm or so).
Propping is easy- I usually use a scaff podger or similar to give it the last quarter turn.
Don't forget load spreaders (if you're working on suspended floor or any markable surface)
 
Sponsored Links
I've been told things about people fighting with them - struggling to adjust the final height
What's so hard about rotating a screw thread?

However if you mean adjust the height of whatever you are propping, then you're not doing it right.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top