- Joined
- 31 Aug 2005
- Messages
- 4,064
- Reaction score
- 369
- Country
Just about to build my timber base for 6x5m shed.
The timbers need to be bolted to my upright concrete posts i have cemented into ground (100x100) and the timbers are 7x2.
Im aware i dont want them pulling through.. should i use large washers or are there purpose bolts and washers i use, i guess i should use 2 per post vertical lined?
Was looking at these
http://www.screwfix.com/p/sabrefix-m12-timber-connector-galvanised-dx275-50mm-x-50mm-50-pack/99094
Its more about stopping head pulling through timber im concerned, i see they do some large square washers also.
The timbers need to be bolted to my upright concrete posts i have cemented into ground (100x100) and the timbers are 7x2.
Im aware i dont want them pulling through.. should i use large washers or are there purpose bolts and washers i use, i guess i should use 2 per post vertical lined?
Was looking at these
http://www.screwfix.com/p/sabrefix-m12-timber-connector-galvanised-dx275-50mm-x-50mm-50-pack/99094
Its more about stopping head pulling through timber im concerned, i see they do some large square washers also.