Hi, thanks in advance for any help. I'm renovating a bathroom, and am integrating a ProofVision dual electric toothbrush charger into a cabinet.
So that I can have it only come on for a few hours each week, I want it wired to a 3 pin plug which I will then plug into a timer, then a socket in the loft. My question is... what thickness of cable would I need? I've just bought some 2.5mm squared but it's chunkier than I thought. Could I use 1.5mm squared?
Doing a similar thing with a mirror demister pad, but that will plug into a smart plug activated by a motion sensor. Would 1.5mm squared be okay for that?
Thanks for any help!
So that I can have it only come on for a few hours each week, I want it wired to a 3 pin plug which I will then plug into a timer, then a socket in the loft. My question is... what thickness of cable would I need? I've just bought some 2.5mm squared but it's chunkier than I thought. Could I use 1.5mm squared?
Doing a similar thing with a mirror demister pad, but that will plug into a smart plug activated by a motion sensor. Would 1.5mm squared be okay for that?
VISABEL Mirror Demister Pad 524 x 1024mm 100W / 230V
VISABEL mirror heating film is self-adhesive and fits to the back of the mirror. Electric conductors in the film heat the mirror to approx. 30°C, thus preventing condensation on the mirror. Each pad heats an area approximately 20% larger than the pad itself. VISABEL mirror demisting pads can be...
www.wholesaleglasscompany.co.uk
Thanks for any help!