Does anybody have a list of fault codes for whirlpool washer. I have an awm8163 with fault f11 showing. This came about after a blockage in the drain line. I managed to clear the blockage but this fault now shows. The manual suggests an electrical component failure but this seems unlikely as the pump failure code came first
Whirlpool washing mahine fault codes
- Thread starter mitchok
- Start date
Sponsored Links
Yes.
The pump Fail code PF showed initially. This was idemntified as a piece of fabric blocking the pipe between drum and pump. Once this was cleared, the machine worked for a cycle. On restarting it, the F11 code came up. At present, if you press start on any cycle, the pump runs for about 5 srcods before beeping and diosplaying this code.
I have written to Whirlpool, but nt yet had a reply. I will as you suggest, phone them. Thanks for the number
Ta
Darren
The pump Fail code PF showed initially. This was idemntified as a piece of fabric blocking the pipe between drum and pump. Once this was cleared, the machine worked for a cycle. On restarting it, the F11 code came up. At present, if you press start on any cycle, the pump runs for about 5 srcods before beeping and diosplaying this code.
I have written to Whirlpool, but nt yet had a reply. I will as you suggest, phone them. Thanks for the number
Ta
Darren
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
