Hi,
I have taken the power supply from a 13amp double socket and connected a 13amp Fused Connection unit.
I intend to use the FCU to power to lights using a 2 gang switch. I have done this before using a 1 gang switch but unsure how to perform this as the switch is not easily understandable. The each switch has an L, L1 and L2. I'm not too sure if the L is the replacement for Common as in the other light switches.
The mains, Supply, is fitted on the FCU.
Could someone explain what I need to do to the connection from the load terminals of the FCU to the 2 gang switch's connections and the from the 2 Gang switch to the lights terminals all wiring is Red - Live, Black - Neutral and Bare - Earth.
Thanks in adavnce.
Cybertek
I have taken the power supply from a 13amp double socket and connected a 13amp Fused Connection unit.
I intend to use the FCU to power to lights using a 2 gang switch. I have done this before using a 1 gang switch but unsure how to perform this as the switch is not easily understandable. The each switch has an L, L1 and L2. I'm not too sure if the L is the replacement for Common as in the other light switches.
The mains, Supply, is fitted on the FCU.
Could someone explain what I need to do to the connection from the load terminals of the FCU to the 2 gang switch's connections and the from the 2 Gang switch to the lights terminals all wiring is Red - Live, Black - Neutral and Bare - Earth.
Thanks in adavnce.
Cybertek