In my new Kitchen there will be 2 x 5 50w GU10 spot, each with a seperate circuit. Obviously with no ceiling rose I need to join together the main power feed and the switch and the lights. As we're not supposed to put connections in inacessible places, how should I join these together?
I though about using a 35mm deep steel backbox and using a couple of screw down connecting blocks behind the light switch to join together the neutrals and earths (And earthing the box/faceplate)
Is this an acceptable method?
I am going to have similar issues with the light switches for external lights and security sensors.
I though about using a 35mm deep steel backbox and using a couple of screw down connecting blocks behind the light switch to join together the neutrals and earths (And earthing the box/faceplate)
Is this an acceptable method?
I am going to have similar issues with the light switches for external lights and security sensors.