- Joined
- 12 May 2007
- Messages
- 292
- Reaction score
- 2
- Country
Going to change out old yellow light sockets. The existing 1 gang switch has common terminal at top, this has cable with grey sleeve on it, below this are L1 and L2 terminals. The new crabtree one i have has L1 at top, L2 at bottom where L1 was b4 and L3. The crabtree diagram shows yellow or grey going to L1 so i imagine thats what the grey sleeve is 4. Not sure of other 2 as both red, should i put L2 cable into L2 on new switch?