worktop/island sockets

[timtheenchanter]

I'm stumped here, I know I have seen these things, but cant find them.
Im looking for a work surface mount to put a double socket in where there is no wall (eg a kitchen island) in this case, its because the wall is all window.

something similar to this.

but just takes a standard double socket (yes, I know you can get these with a double socket in, but it wont match the rest of them then)

 

[Click4]

http://www.tlc-direct.co.uk/Main_In...s_Menu_Index/Under_Worktop_Sockets/index.html

 

[PrenticeBoyofDerry]

like this
http://www.cedecor.co.uk/cheshire_e...lectrical+socket+stainless+steel/pid/31767968

 

[RF Lighting]

Clicky


Brace your self for the price though

 

[Monkeh]

Brace your self for the price though

How the hell do they get away with charging 160 quid for 4m worth of PVC?

 

[Taylortwocities]

What about something like THIS?

 

[holmslaw]

..

 

[Monkeh]

Brace your self for the price though

How the hell do they get away with charging 160 quid for 4m worth of PVC?

£26.43

http://www.discount-electrical.co.u...ng-accessory-box-105mm-x-90mm-x-190mm[/QUOTE]

I was talking about the lengths of trunking, not the (equally overpriced) bench units. You'd figure that out if you read what I said and looked.

 

[holmslaw]

..

 

[ban-all-sheds]

Holmslaw - please do the following.

1) Read what Monkeh wrote about the price of 4m of trunking.

2) See the price here: http://www.discount-electrical.co.u...-90mm-x-105mm-2m-length--pack-size-2-lengths- of £158.14 + VAT for 4m of trunking.

3) Stop trying to use mockery of others as an attempt to distract attention from your mistake.

 

[bernardgreen]

Use a floor mounting socket with a flap such as http://www.tlc-direct.co.uk/Images/Products/size_3/KN99UBC.JPG set into a plinth about an inch high so as to raise it above any spillage of liquid on the work surface.

 

[Taylortwocities]

What about something like THIS?

 

[timtheenchanter]

cheers, twas the pinnicle thing I was thinking of, glad I was sat down for the price!!!
might have to look again, the pop up things are ok, but will never get "unpopped"
might make some up, even £30 seems a bit steep for a fancy shaped back box, might have a play at vacuum moulding...

 

[holmslaw]

..

 

[Monkeh]

Then Monkeh "says How the hell do they get away with charging 160 quid for 4m worth of PVC?" Its irrelevant to the thread and of no help to the op.

So I will not be apologising for someones elses confusing communication skills that lead to my terrible and unforgiveable "mistake"

There's nothing confusing about what I said. You'll note I didn't include the link to the bench unit.

Please go away until you can cope with public forums.