Hi,
I have recently installed the above alarm, control box, siren, two PIR's, two door contacts and 4 fobs(4 button type).
Firstly, let me say I have set the door contacts to 'entry', exit and entry time to 30 secs. I have installed three alarm system recently (not HSA6400) so I am familiar with Yale alarms.
Here are the faults I am experiencing.
Arming the system, either fob or control panel, at the end of exit time the system arms, as shown on the control panel, but the siren does not sound (beep) or the led's flash.
The system can only be disarmed by the control panel. not a fob.
While armed triggering a door contact sounds the alarm immediately, not waiting for entry time.
Any help will be greatly appreciated.
Please let me know if you require further information.
Best regards
I have recently installed the above alarm, control box, siren, two PIR's, two door contacts and 4 fobs(4 button type).
Firstly, let me say I have set the door contacts to 'entry', exit and entry time to 30 secs. I have installed three alarm system recently (not HSA6400) so I am familiar with Yale alarms.
Here are the faults I am experiencing.
Arming the system, either fob or control panel, at the end of exit time the system arms, as shown on the control panel, but the siren does not sound (beep) or the led's flash.
The system can only be disarmed by the control panel. not a fob.
While armed triggering a door contact sounds the alarm immediately, not waiting for entry time.
Any help will be greatly appreciated.
Please let me know if you require further information.
Best regards