Hi All
I have a honeywell ST9100 and a HC60NG. which I am going to change to a Dayton wiser setup.
I popped the lid off the st9100s and understand all I need to move is the wire from the 4 to the 3 to make it work so that bit is not a problem.
I want to completely remove the HC60NG.
Understand the Live and neutral is just the case of removing. and I am guessing that just feeds back to the switched spur, (all my wiring seems to be in the wall)
And link 2 of the other wires to give it a constant link?.
I found a diagram that explains the ST9100s and the HC60NG but not working with each other.
Thank you in advance for the help.
I have a honeywell ST9100 and a HC60NG. which I am going to change to a Dayton wiser setup.
I popped the lid off the st9100s and understand all I need to move is the wire from the 4 to the 3 to make it work so that bit is not a problem.
I want to completely remove the HC60NG.
Understand the Live and neutral is just the case of removing. and I am guessing that just feeds back to the switched spur, (all my wiring seems to be in the wall)
And link 2 of the other wires to give it a constant link?.
I found a diagram that explains the ST9100s and the HC60NG but not working with each other.
Thank you in advance for the help.