Zanussi 1250 - WJS 1397W Access to the drum

[2MuchNFO]

Hi all,
hot on the heels of building my first fence I thought I'd have a go at looking into the noise that our washer/dryer has started to make.

A rattling sound suddenly started and sounds like something has fallen through the holes in the drum.

I've unplugged, taken the top off it, looked at it a bit, looked a bit more, had a cup of tea, looked again, but just can't see how to get access to the space under the holes in the drum.

The case wraps around the whole of the back and front, joining at the sides in a clam shell fashion.

Could anyone please point me in the right direction for getting access with this model of washer?

Many thanks.

Graeme

 

[jj4091]

Try & get in from the hole in the bottom where the drain pipe goes to the pump.

 

[2MuchNFO]

It was a screw. managed to get it out through the front by easing back the rubber seal.
...but now can't get that back on.

What a pain.

Graeme

 

[TrafficProducer]

Zanussi Door Seal Fix. Zanussi 1250. WJS 1397W. TurboDry. Jetsystem Excel. RSI, Rinse Sensor Injection

These pages are about how to fit the door seal on a Zanussi 1250. WJS 1397W. TurboDry

Hope this is what you are looking for