- Joined
- 14 Aug 2008
- Messages
- 1
- Reaction score
- 0
- Country
I have a Zanussi 1200 XC washer Dryer, it was working ok, we had to move it to put in new vinyl, now when it spins there is a very bad vibration,
it is level on the floor and otherwise ok, could it be something that happened in the temporary move in and out or maybe it needs new dampers ? I had a look there are 2 springs at the top and 2 dampers below, but nothing to stop foward and back movement. Also when turning the drum by hand there is a lot of end float on this, could this be the problem ?
it is level on the floor and otherwise ok, could it be something that happened in the temporary move in and out or maybe it needs new dampers ? I had a look there are 2 springs at the top and 2 dampers below, but nothing to stop foward and back movement. Also when turning the drum by hand there is a lot of end float on this, could this be the problem ?