Help needed to diagnose d/w fault please.

Hi,

My came down in the morning and my dish washer had packed in!

Symptoms, discharge pump runs for about a second, then beeps. Pause, pumps runs, beeps etc. ad infinitum!

Things I have tried
1. Turn off, wait, turn on - exactly same.
2. Strip discharge pump- no problem found.
3. Pour in jug of water, activate float switch in base – pumps out fine.
4. Strip out all pipe work to recirc pump - no problems found.
5. Bench recirc pum - runs fine.
6. Bench inlet solenoid - works fine.

The LEDs are not showing any fault.

The problem appears to coincide with not replacing the filter properly after cleaning, hence checking all the pipes/pumps for blockages.

How can I fix it if I don't know what's wrong!!!!!!!!!!

Any help greatly appreciated.

Thanks


Paul

Make and model number?

If this helps

It's a Teka DW6 59 F1

It is in danger of becoming a projectile!!

Thanks

Sorry, don't know this model. It's most likely a Chinese built Haier machine rebadged. Known problems include faulty pcb, flooding into base and door/hinge faults.
Unfortunately it's one of these machines that I can't remotely diagnose.