richy_rich

Joined: 15 Oct 2007 Posts: 3 Location: Tyne and Wear, United Kingdom Thanked: 0 times
|
Posted: Mon Oct 15, 2007 12:19 pm Post Subject: Zanussi FLS 1183 W |
 |
|
Washing machine has stopped spinning though it does spin manually by hand.
It fills and empties no problem and I've even ran it empty to ensure its not a uneven load.
When I run a cycle I hear one click then it normally spins but I now hear another click which sounds like some sort of switch which is cutting in to stop the spin.
I've checked the filter and that is not the issue also - any ideas ???
Cheers, Rich. |
|
sheer1delight

Joined: 07 Jul 2007 Posts: 93 Location: Down, United Kingdom Thanked: 1 time
|
Posted: Mon Oct 15, 2007 2:09 pm Post Subject: |
 |
|
Does the drum turn during the wash/rinse programs or is it only only fast spin that it fails to work |
|
richy_rich

Joined: 15 Oct 2007 Posts: 3 Location: Tyne and Wear, United Kingdom Thanked: 0 times
|
|
Sleepyhead

Joined: 02 Apr 2006 Posts: 1896 Location: United Kingdom Thanked: 4 times
|
Posted: Mon Oct 15, 2007 2:35 pm Post Subject: |
 |
|
Most common cause is carbon brushes in the motor worn away. |
|
Percy Vere

Joined: 20 Jul 2005 Posts: 53 Location: Hertfordshire, United Kingdom Thanked: 0 times
|
Posted: Mon Oct 15, 2007 3:06 pm Post Subject: |
 |
|
Or the drive belt has come off/broken. |
|
richy_rich

Joined: 15 Oct 2007 Posts: 3 Location: Tyne and Wear, United Kingdom Thanked: 0 times
|
Posted: Wed Oct 24, 2007 3:05 pm Post Subject: |
 |
|
It was the carbon brushes - got them replaced the same day £35 - Washer working fine noo!
Thanks for the replies.
RR. |
|