Klik Lighting?

K

kevinspark

Joined

14 Apr 2007

Messages

32

Reaction score

0

Country

• 14 Apr 2008

• #1

Hi Guys,

Im connecting up a Klik light, and on the plate theres 4 connections, an earth, neutral, loop and a blank one? Im just wondering wether the sw would go into the loop or the blank terminal?

Anyone familiar with connecting these up?

Thanks

 

RF Lighting

Joined

31 Mar 2006

Messages

20,027

Reaction score

1,391

Location

Leeds

Country

• 14 Apr 2008

• #2

Loop does not actually connect to the plug. It is there just as a terminal to joint a live feed for example.

Is the blank terminal actually labbled with a letter 'A'?
This is an auxilary terminal and can be used to provide a permanant live to an emergency light via a 4 pole plug and 4 core flex for example.

The 'live' terminal is normally the switched live to your fitting.

 

K

kevinspark

Joined

14 Apr 2007

Messages

32

Reaction score

0

Country

• 14 Apr 2008

• #3

Thanks for the quick response

Yeah I seem to remember it having A on it. Im just running a 3 core pyro from a override switch to an emergency light so the light will have permanent power apart from when the power goes down. So the A is the one I want!

Thanks again!

 

333rocky333

Joined

12 Jan 2008

Messages

8,763

Reaction score

1,015

Location

Essex

Country

• 14 Apr 2008

• #4

you can only use A if you are using the red type plug, that goes in the special socket
this is so you dont get switched lights and permenent supplied light plugs swopped about