Draught proofing Draught proofing windows and doors is another way of saving money on your energy bills. Draughts are caused by cold air forcing its way through gaps around windows or doors. By blocking the gap you will stop the draught, but be careful not to block out the draught designed to pass under the […]
Draught proofing windows and doors Read More »
Draught proofing a timber floor If the flooring is causing draughts, use insulation between suspended floor joists. If there are gaps between floorboards, use thin strips of softwood. Plane them into wedged strips and tap the wood into place using a mallet. Adhesive can be applied to the strip to help make a neat finish.
Draught proofing a timber floor Read More »
Time switches An automatic time switch can turn the heating on and off at pre-set times to suit your pattern of everyday life. This is an inexpensive way of controlling your heating system. Time switches can also plugged in at the wall, to allow equipment or lights to switch on and off at pre-set times.
Immersion heater thermostat control An immersion heater needs a thermostat control to save money and to stop the water becoming dangerously hot. Set the temperature at 60°C (140°F). If you have “Economy 7” heating, you will have access to cheaper electricity rates for seven hours a night, starting between midnight and 1am. To gain maximum
Immersion heater thermostat control Read More »
