5.8 grade zinc-plated steel with chisel point at one end and drive stud at the other end. During setting, the oblique end destroys the capsule then mixes and activates mortar. For use when driving into resin capsules or can be used with cartridge-based...

Versatile nylon frame fixings with multiple anchorage depth. Approved for all brick, aerated and hollow block concrete and timber. Use in multiple applications within most building materials. Through special plug geometry, loads are evenly distributed....

Blue passivated zinc-plated screws with countersunk heads, cross drive PZ and full thread. The countersunk head allows for surface flush installation in wood. The integrated thread, which runs throughout the entire screw length, ensures the optimum transfer...

Zinc-plated steel anchor with hexagonal screw for structural fixings. Time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take...

Hybrid 2-component injection mortar based on polyester resin specifically for fixings in non-cracked concrete C20/25 to C50/60, vertically perforated brick, perforated or solid sand-lime brick, perforated lightweight concrete blocks, solid brick, aerated...

Plastic fixing is solely made of high quality nylon. This means that the plug is particularly robust during installation and ensures permanent safety. The pre-sorted kit is therefore ideally suited to fitting mirrors. Installation-friendly nylon plug...

Easy self-drilling plug with cross-drive recess can be drilled straight into plasterboard. No special setting tool required. Supplied with screws and drill bit. Sharp, self-tapping thread enables a secure, positive fit fixing and achieves a high load-bearing...

Nylon hammer-in fixings suitable for all solid masonry. Quick and simple installation. Integral setting lock prevents pre-expansion. Rigid reinforced collar. Saw-tooth threaded screw. Easy tap-in, easy screw-out.

Blue passivated zinc-plated screws with countersunk heads, cross drive PZ and partial thread. The countersunk head allows for surface flush installation in wood. Suitable for fixing load-bearing components in coated wood, hardwood, softwood and timber...

Blue passivated zinc-plated screws with countersunk heads, cross drive PZ and full thread. The countersunk head allows for surface flush installation in wood. The integrated thread, which runs throughout the entire screw length, ensures the optimum transfer...