|
FloPlast Push-Fit 2-Boss Single Socket Access Pipe 110mm
For use where access is required in a straight section, such as the base of a soil stack. For use with 32, 40 and 50mm boss adaptors. uPVC Construction Push-Fit Connection Ring Seal Joints Suitable for Gravity Drainage & Sewerage Install to Depths of... |
£16.99 More Information |
|
FloPlast WC22 Universal Compression Waste Equal Tee White 32mm
Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally... |
£3.59 More Information |
|
FloPlast Push-Fit 0-90° Double Socket Adjustable Bend Grey 110mm
Manufactured from Polypropylene. Not suitable for solvent welding. The use of silicone lubricant on all seals will facilitate jointing. Polypropylene Construction Push-Fit Connection Ring Seal Joints |
£14.49 More Information |
|
FloPlast Push-Fit 135° Double Socket Bottom Offset Bend Grey 110mm
Solvent socket to spigot. uPVC Construction Push-Fit Connection Ring Seal Joints |
£14.99 More Information |
|
FloPlast Copper / MDPE Adaptor Kit 22mm x 25mm
Simple and quick to connect, suitable for use with stopcocks only. Resistant to pull-out. Excellent pressure resistance, tested to 48bar. Exceeds the performance requirements of UK Water Bylaws Scheme. Demountable & Reusable Suitable for Cold Mains Supply... |
£9.99 More Information |
|
FloPlast MDPE Equal Tee 25mm x 25mm x 25mm
25 x 25 x 25mm. High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body... |
£8.39 More Information |
|
FloPlast Push-Fit 92.5° Double Socket Branch Black 110mm
Lightweight Branch manufactured from uPVC for strength and durability. Easy to work with and suitable for high temperature waste discharges. Side bosses connect 32mm (Code 41571) and 40mm (Code 89174) waste pipe to the 110mm soil stack The use of silicone... |
£17.99 More Information |
|
FloPlast Push-Fit Straight Coupler White 32mm x 32mm
Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of... |
£1.64 More Information |
|
FloPlast Solvent Weld Pipe Clips Black 32mm 20 Pack
Solvent weld waste system. Black Cost Effective System Lightweight & Strong Solvent Weld Joint Requires No Tightening Extensive Range |
£11.59 More Information |
|
FloPlast Push-Fit Equal Tee Black 40mm
Easy to install, push fit seal system. Made from tough polypropylene. Available in 32mm and 40mm sizes. Polypropylene Construction No Solvent Welding Required |
£1.89 More Information |