The equal tee is a push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Tight seal inserts just push straight onto copper tube or speedfit piping.

Radiator outlet plate allows 10 mm pipes to be dropped down from above pipe runs to relevant radiator positions. This means all pipework is concealed within the wall and behind the radiator.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the stop end fitting fully onto the pipe up to the pipe stop.

John Guest Speedfit 22mm x 25m Layflat Barrier Pipe

Push-fit plastic straight tap connector fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Push-fit Plastic Fitting for the connection of plastic and copper pipe. Fully demountable just unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

Plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications.

Flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps.