|
Trend Snappy TCT Glass Drill Bit 3mm
TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. D: 3 mm Shank Diameter: 1/4 inch hex Shank Diameter: 1/4 hexmm Dia Metric: 3... |
£7.95 More Information |
|
Trend Two Flute Long Reach Hinge and Lock Jig Router Cutter 12mm 19mm 1/4"
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. ... |
£36.95 More Information |
|
Trend HSS Single Flute Straight Cut Router Cutter 4.8mm 19mm 1/4"
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than t... |
£13.95 More Information |
|
Trend Easyset Bearing Guided Classic Combination Set 41mm 11mm 1/2"
These tools produce the same type of joint & use the same components as the combination PSC sets. Both parts of the joint are cut by only changing the cutter height. No reassembly of parts is required, to convert the tool from scribing mode to ... |
£139.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 18.2mm 21mm 1/4"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18.2 ... |
£39.95 More Information |
|
Trend Intumescent Strip Recesser Bearing Guided Router Cutter 27.05mm 10mm 1/2"
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Two sizes available to suit 4mm thick strip of 10mm or 15mm width. Intumescent strip is used to create an effective barrier to both fire an... |
£59.95 More Information |
|
Trend CRAFTPRO Wood Cutting Saw Blade 165mm 24T 30mm
A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to sp... |
£23.95 More Information |
|
Trend Down Cut Shear Two Flute Router Cutter 12.7mm 50mm 1/2"
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Has a 3 de... |
£51.95 More Information |
|
Trend Professional Two Flute Straight Router Cutter 21mm 19mm 1/2"
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 21 &... |
£56.95 More Information |
|
Trend CRAFTPRO Bearing Guided Biscuit Jointer Set 4mm 37.2mm 1/2"
Trend Craft Pro 1/2in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. Supplied with three interchangeable bearings covering... |
£46.95 More Information |