|
Expert by Facom Drift Punch 5mm
Drift punchFeatures:- Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm- One-piece for more strength and longer lifeSpecifications:Length: 152mmWeight: 55gDiameter: 5mm... |
£4.49 More Information |
|
Expert by Facom Drift Punch 3mm
Drift punchFeatures:- Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm- One-piece for more strength and longer lifeSpecifications:Length: 152mmWeight: 52gDiameter: 3mm... |
£4.49 More Information |
|
Expert by Facom Drift Punch 4mm
Drift punchFeatures:- Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm- One-piece for more strength and longer lifeSpecifications:Length: 152mmWeight: 55gDiameter: 4mm... |
£4.49 More Information |
|
Expert by Facom Drift Punch 2mm
Drift punchFeatures:- Hardness 48-56 HRC for diameters 2 to 4 mm and 50-58 HRC for diameters 5 to 8 mm- One-piece for more strength and longer lifeSpecifications:Length: 152mmWeight: 35gDiameter: 2mm... |
£4.49 More Information |
|
Faithfull Round Head Parallel Pin Punch 2.5mm
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch... |
£2.95 More Information |
|
Faithfull Round Head Parallel Pin Punch 4.8mm
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch... |
£2.95 More Information |
|
Faithfull Round Head Parallel Pin Punch 4mm
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch... |
£2.95 More Information |
|
Faithfull Round Head Parallel Pin Punch 1.5mm
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch... |
£2.95 More Information |
|
Faithfull Round Head Parallel Pin Punch 3mm
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch... |
£2.95 More Information |
