Polypropylene bend for connection to Macvalve-1 to create a low level basin trap. Polypropylene Construction

Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally...

Offers maximum flexibility when conventional fittings cannot be used. Flexible, extendable and can be used up to 90°. Polypropylene Construction Extendable from 125-175mm (Excluding Nuts)

Self-closing valve with membrane that opens under water pressure to allow discharge to flow freely and then closes to form a seal to prevent the circulation of foul odour. Can be fitted in a horizontal or vertical position. Can be used as a low level...

Offers maximum flexibility when conventional fittings cannot be used. Flexible, extendable and can be used up to 90°. Polypropylene Construction Extendable from 125-175mm (Excluding Nuts)

Polypropylene bend for connection to Macvalve-2 to create a low level basin trap where suitable access is possible. Polypropylene Construction

32mm straight connector for domestic and commercial use. Construction

Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that externally...

32mm flexible connector for domestic and commercial use. Plastic Construction 1.25" Outlet 1.25" Inlet

Manufactured in polypropylene this handy fitting can be used to convert European wastes to allow for connection to 1½" UK traps. Connects to 40mm European basin wastes. Polypropylene Construction