Designed to maximise heat output by having 2 layers of bars (a full rear layer and a forward layer with gaps for towels). Flat bars, with closely spaced gaps, differ from the standard 'ladder rail' creating a fuller looking design. Front bars protrude...

Features horizontal bars which overshoot the uprights to form the battery-like appearance of its industrial design. Can be fitted as dual fuel, running with the use of central heating in the winter and electrically in the summer, if fitted with Terma...

2-colour non-reversible design with upright collectors fully concealed behind a fixed, left-handed masking cover. Bars are equally spaced all the way down, with a large enough gap to hang towels with ease or dry clothes. Features 50mm pipe connections...

Sturdy-looking towel rail features chunky, oversized 40mm bars, helping to offer increased heat outputs, allowing use as the only heat source in the bathroom. Brackets are located on the rear of the uprights, leaving the full width of the bars free for...

2-colour non-reversible design with upright collectors fully concealed behind a fixed, left-handed masking cover. Bars are equally spaced all the way down, with a large enough gap to hang towels with ease or dry clothes. Features 50mm pipe connections...

Sturdy-looking towel rail features chunky, oversized 40mm bars, helping to offer increased heat outputs, allowing use as the only heat source in the bathroom. Brackets are located on the rear of the uprights, leaving the full width of the bars free for...

Designed with large flat bars which sweep forward and then bend backwards on themselves to create a towel rail which is only mounted to the wall on one side, leaving the other side open and free for easily hanging towels on. Can be mounted either way...

Square-profile taps with diamond-shaped upright and horizontal bars. Ideal for family bathrooms or utility rooms due to the multiple, wide-spaced gaps for hanging both towels and clothes. Has a gap of 63mm from the back of the bars up to the wall. Features...

Manufactured from one single moulding, creating a frame around the bars in contrast to standard 'ladder-style' towel rails. Features radius edges for an ergonomic, seamless design free from sharp corners. Rear-located brackets leaving the full width of...

Symmetrical rail with equally spaced bars on the left and right side. Ideal for ensuite bathrooms or cloakrooms where a small hand towel will be used. The upper bar is flat and the brackets are set wide apart meaning a towel can be hung over the top with...