|
Trend CRAFTPRO Intumescent Strip Router Cutter 24mm 10mm 1/4"
Trend Craft Pro 1/4in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. Bearing guide ensures the correct 4mm ... |
£36.95 More Information |
|
Trend CRAFTPRO Bearing Guided Easyset Bevel Router Cutter 41mm 17mm 1/2"
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint... |
£88.95 More Information |
|
Trend HSS Two Flute Straight Router Cutter 6.3mm 28mm 1/4"
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than t... |
£18.95 More Information |
|
Trend Handrail Profiles Router Cutter 32mm 38mm 1/2"
Side profile for an attractive handrail. Can be used in conjunction with four different cutters to produce different handrail tops. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 38 &bull... |
£97.95 More Information |
|
Trend Two Flute Pocket Router Cutter 6.3mm 19mm 1/4"
A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only ... |
£38.95 More Information |
|
Trend CRAFTPRO Single Flute Router Cutter 4.8mm 11.1mm 1/4"
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exceed cutter diameter. Specifications:... |
£18.95 More Information |
|
Trend WS Plug Maker 1"5/8" 1/2"
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped ... |
£138.95 More Information |
|
Trend Cove Bearing Guided Router Cutter 41.3mm 18mm 1/2"
The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 18 • Overall Length Metric... |
£88.95 More Information |
|
Trend Undercut Router Cutter 25.4mm 6.3mm 1/4"
To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 6.3 &bu... |
£55.95 More Information |
|
Trend CRAFTPRO Bearing Guided Groove Router Cutter 12.7mm 12.7mm 1/4"
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Le... |
£30.95 More Information |
