|
Trend FHA/009 Fine Height Adjuster Various Routers
This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height. They are especially useful for accurate work such as when the router is held inverted in a router table. Suitable for the following TREND... |
£22.95 More Information |
|
Trend Replacement Bearing 32mm 10mm 12mm
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Bearing Dia Metric: 32 • Sawbo... |
£15.95 More Information |
|
Trend Router Guide Bush 16mm
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications: ... |
£13.95 More Information |
|
Trend Replacement Bearing 28mm 8.9mm 8mm
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw... |
£20.95 More Information |
|
|
Trend Router Guide Bush 31.8mm
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications: ... |
£13.95 More Information |
|
|
Trend Router Guide Bush 22mm
Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Specifications: ... |
£13.95 More Information |
|
Trend Replacement Bearing 5/8" 3/16" 1/8"
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Alw... |
£13.95 More Information |
|
|
Trend Replacement Bearing 1/2" 3/16" 3/16"
Trend Router Cutter Bearing - for 3/16in bottom mounting High quality ball bearing for free running against an edge to prevent heat build up. 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters. 1/2in outside diame... |
£7.49 More Information |
|
|
Trend Replacement Cutter Bearings Metric OD 29mm
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 5 • Bearing Dia Metric: 29 • Sawbor... |
£20.95 More Information |
|
|
Trend Replacement Cutter Bearings Metric OD 35mm
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bearing Dia Metric: 35 • Sawbor... |
£15.95 More Information |
