Designed for quick and easy setting of operating flow rates, prior to installation of washing machines, boilers, showers and traps. Also used for checking if a combi boiler or water heater needs descaling. Measures 2-22Ltr/min Flow Rate Plastic Construction...

Suitable for water, air, gas and petroleum oil pipes up to 60psi and for testing combi systems. Can be left on test while flooring is laid to reveal any nail damage. Tests hot and cold supplies separately to ensure pipes are not crossed. Dry tests pipework...

Excellent quality tool for testing mains water pressure. With ¾" BSP thread for fitting to taps. For washing machine taps only. 11bar maximum. Pressure in psi & bar Aluminium Construction 250mm Braided Hose 3/4" BSP Hose

Tests installed pipework for leaks prior to introduction of gas, checks and sets correct gas pressures on domestic and commercial appliances. Scale adjusts to zero water level. Marked in millibars. Pressure in mBar

For blocking off small pipes for dry testing prior to commissioning. Cannot be used for air testing by themselves. Suitable for 15, 22 & 28mm Diameter Pipes Nylon Construciton

Durable metal and plastic construction. Easy to install. Pressure in psi & bar Metal & Plastic Construction 1/4" Thread

Durable metal and plastic construction. Easy to install. Pressure in psi & bar Metal & Plastic Construction 1/4" Thread

For testing drains and sewers in accordance with building regulations. Pressure in mBar

Identifies leaks in the system. Once detected a smartphone notification is sent. Easy to install with sensor being clipped to the mains water pipe. Depth of Water Detectable: Noise Level Temperature Range: 0 - 30°C Battery-Powered 1 Year Guarantee...

Compact and weatherproof. Long cable allows maximum flexibility in positioning to detect and notify in the event of water leaks. Suitable for use on taps, washing machines, basins, bath tubs and pipes as well as in kitchen and laundry areas. Easy to set...