EBS circular cutter with unique Tri-Cut design. For quicker, smoother results and reduced vibration in hard masonry materials. Heat-Treated Tungsten Carbide Blade SDS Plus Shank Requires a 6mm Pilot Hole For Use with Rotary-Hammer Action on SDS Plus Drills...

Precision-machined cutting edges for rapid chiselling of single gang holes in masonry. For use after the Tri-Cut circular cutter. Heat-Treated Steel Alloy Blade SDS Plus Shank Requires a 6mm Pilot Hole For Use with SDS Plus Hammer Drills with Roto-Stop...

Precision-machined cutting edges for rapid chiselling of double gang holes in masonry. For use after the Tri-Cut circular cutter. Heat-Treated Steel Alloy Blade SDS Plus Shank Requires a 6mm Pilot Hole For Use with SDS Plus Hammer Drills with Roto-Stop...

Use after circular cutter when drilling over 15N into very hard materials such as engineering brick and concrete.

Single and double box sinking kit with tri-cut design. For quicker, smoother results and reduced vibration in hard masonry materials. For use with SDS plus hammer drills with roto-stop facility. Includes chisels and drill bits for wall chasing. SDS Plus...

Single gang box sinking kit with tri-cut design. For quicker, smoother results and reduced vibration in hard masonry materials. For use with SDS plus hammer drills with roto-stop facility. Includes chisel and pilot drill. SDS Plus Shank For Use with SDS...

13mm keyed chuck and adaptor including key. Allows fitting of standard 13mm chuck to SDS Plus rotary hammers. Use in rotary mode only. 1/2" x 20 UNF Thread

Can be used as a replacement keyed chuck or with the adaptor to convert an SDS chuck to a keyed 3-jaw chuck. Not suitable for hammer action, rotation mode only. 1/2" x 20 UNF Thread

Long life, high quality aluminium oxide and silicon carbide wheel accurately sharpens 3-13mm diameter, HSS (including titanium-coated and cobalt), masonry (regular and hammer), SDS plus, centre point wood (brad point) and flat wood bits. Grinding jig...

Applies the required 15° chamfer to any 110mm PVC pipe including drain and soil pipes in seconds. Works with a power drill by mounting the male spigot into the drill chuck. Cuts 110mm Pipe Suitable for Plastic Pipes Cuts 15° Chamfer Robust Zinc...