For trimming and bevelling timber, lippings and plastic laminate edges. D 1/4 inch D 6.35 mm C 1 inch C 25.4 mm Overall length 74.2 mm Shank Diameter 1/4 inch

Use the CDJ600 in conjunction with a handheld router to create a variety of elegant joints.

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods D 1/2 inch D 12.7 mm C 63 mm OL 106 mm Shank Diameter 1/2 inch Please note: This cutter is especially suited for drilling

For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. D 15/64 inch D 6 mm C 16 mm OL 56.5 mm Shank Diameter 1/4 inch

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with...

Cutter for use with the Leigh Dovetail Jig. D 1/2 inch D 12.7 mm C 9.5 mm OL 57 mm A 108 degrees Shank Diameter 1/4 inch

Bearings are shielded to prevent penetration of dust and grease packed for life.

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Outside diameter 22 mm Projects from plate 4 mm Plate diameter 60 mm Csk screw hole centres 50 mm

Guide bush guides the router when using a template. Outside diameter 16 mm Inner diameter 13 mm Projects from plate 6 mm Plate diameter 60 mm Csk screw hole centres 50 mm

Bearings are shielded to prevent penetration of dust and grease packed for life.