Accurately machined with reamed bores and splined outside edges for a precision fit into the blade bore of Trend Professional (Waveform) and Industrial sawblades only.

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.

A 3mm spacer pack for use with the Hinge jig to allow it to be used on architrave that is set back by 4mm. Easy to retro fit to existing hinge jigs and allows for new style architectural designs. Supplied with fixing screws.

Rigid plastic safety pushstick for guiding small sections of timber over a router or table saw.

Replacement location bush for the COMBI66, COMBI651 & COMBI1002 jigs.

This is an important safety attachment when profiling with bearing guided cutters.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. D 1/2 inch D 12.7 mm C 1 inch C 25.4 mm OL 68 mm Shank Diameter 1/2 inch

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.

Replacement screw for the rota-tip cutters.