For use when having to guide new cables through an internally routed frame, this kit uses magnets to make light work of a task that can be both time-consuming and frustrating. It comes supplied with adaptors to fit inner gear & brake cables, Shimano Di2...

This chain wear indicator gauge should be used periodically to measure how much a chain has worn and stretched, ensuring it can then be replaced before it has caused any additional wear to the components that it runs on. A worn chain can be noisy, cause...

A wheel alignment gauge (dishing tool), is essential for ensuring the wheel sits correctly in the frame or forks by allowing you to check that the rim is centred between the locking nuts on either side of the hub. Ideal for use when wheel building or...

This lightweight, Laser Tools Racing grey snood is perfect for cooler spring or summer days and can be worn in a range of different ways to help protect the wearer against the sun, wind, or cold

Disc brake tool combining two different functions to ensure that brake rotors can run freely and quietly through the caliper. At one end is a rotor truing fork, with two different length slots allowing for different degrees of leverage to be applied to...

Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub and the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone nut spanners is ideal for use by both the home or...

This adjustable bike stand holds onto the rear wheel fixings, supporting the bike in an upright position, providing a safe way to store or display a bicycle without having to lean it against anything else, as well as providing a simple and steady work...

For use when removing and installing sprockets and cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool is used to undo the cassette in the opposite direction.

Required for tightening or loosening spoke nipples a spoke wrench, sometimes referred to as a spoke key, allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true. The LTR spoke wrench has been designed to be comfortable...

Folding tool kit including a range of essential tools to carry out most road and trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back pack, or pocket