The BlueSpot 10pcs Locking Wheel Nut Remover Set (18-25mm) is manufactured from tempered and heat-treated chrome vanadium with a blackened phosphate coating to protect against corrosion. The nut remover set is ideal for those who have lost their security...

This Teng 210Nm 1/2" drive torque wrench can be used for both tightening and final checking of the torque. This wrench is reversible with a lever but only for right hand action for torque checking. It's equipped with an angular gauge for after tightening....

The BlueSpot Extra Wide Adjustable Wrench is manufactured from aluminium alloy for increased durability and has a smooth roller action.

This Teng 25Nm 1/4" drive torque wrench can be used for both tightening and the final checking of the torque. This device is reversible with a lever but only for right-hand action for torque checking. This torque wrench is equipped with an angular gauge...

A mixed set of male and female zinc plated brake nuts in metric and imperial (AF) sizes for use with 3/16" brake pipe.

An assortment of metric bolts

It is quite common for manifold studs to break when their nuts are being removed for engine and exhaust repairs, this is often due to corrosion. The studs and nuts go through thousands of heat cycles over the life of the engine and often the studs can...

A pack of 5000, 18 gauge, galvanised brad nails that are 20mm in length. Ideal for sheet and cladding applications, or applications that do not require the nails to be bearing a significant load. Usually used where the nails are intended to be hidden...

A pack of 2500, 16 gauge, galvanised finish nails that are 38mm in length. Ideal for a range of woodworking applications.

With a screw shank commonly used in the construction industry for timber framing. Galvanised, 3.1mm diameter by 90mm length pack of 3000 strip nails that is especially versatile and is accommodated by most major brand nailers.