Hi have a problem, lookin for answer, have run a 2.5mm 2core + earth cable from consumer unit (cable not connected yet) to point /area for worktop hob pref induction not yet purchased.
Cable route above ceilings have just been plastered + painted !
Have been looking at hobs ideal 1 is 32amp + 15 amp / 10.8 kw ! ? looking at 2nd choice now 8kw.
Can I use a 20 amp rcd with the cable to protect cable as will never use all hobs on full. Presume if to much power will trip on such an occasion..
Cheers . . . .. . .
Cable route above ceilings have just been plastered + painted !
Have been looking at hobs ideal 1 is 32amp + 15 amp / 10.8 kw ! ? looking at 2nd choice now 8kw.
Can I use a 20 amp rcd with the cable to protect cable as will never use all hobs on full. Presume if to much power will trip on such an occasion..
Cheers . . . .. . .