Hi,
I recently bought a Wireless alarm. Link below
http://www.homebase.co.uk/webapp/wc...ay?langId=110&storeId=10151&partNumber=948676
After following the step by step instructions ive run into some problems.
The Siren has been mounted on the wall and the tamper switch is fully depressed.
When I arm the system (using a key fob) the control unit gives me a 30 second count down but the Siren beeps about 8 or 9 times.
When I deactivate the alarm and enter the house the control panel has "ALARM, ALARM" flashing on the screen but neither the siren nor the control panels siren are going off.
I have taken the siren off the wall, placed it on a flat surface and it still beeps when arming.
Could the siren be faulty? the sensors are all set to "burglar".
Thanks in advance
I recently bought a Wireless alarm. Link below
http://www.homebase.co.uk/webapp/wc...ay?langId=110&storeId=10151&partNumber=948676
After following the step by step instructions ive run into some problems.
The Siren has been mounted on the wall and the tamper switch is fully depressed.
When I arm the system (using a key fob) the control unit gives me a 30 second count down but the Siren beeps about 8 or 9 times.
When I deactivate the alarm and enter the house the control panel has "ALARM, ALARM" flashing on the screen but neither the siren nor the control panels siren are going off.
I have taken the siren off the wall, placed it on a flat surface and it still beeps when arming.
Could the siren be faulty? the sensors are all set to "burglar".
Thanks in advance