OK so just a quick update - not sure if I added a section from when I did the floor but all bar a bit of rendering and extra facia on the rear the workshop is finished and in use ![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Electrics were completed by a local company.
Double Metal Clad Sockets and Trunking:
Consumer Unit powered using 6mm armoured cable from the CU in the house:
Cabling in through the roof timbers:
We also ran a 4mm armoured cable under the path into our garage ready for re-wiring:
I also added a shelf:
Electrics were completed by a local company.
Double Metal Clad Sockets and Trunking:
![zXCtufq.jpg](https://i.imgur.com/zXCtufq.jpg)
Consumer Unit powered using 6mm armoured cable from the CU in the house:
![nq18DqP.jpg](https://i.imgur.com/nq18DqP.jpg)
Cabling in through the roof timbers:
![M2bl9Ij.jpg](https://i.imgur.com/M2bl9Ij.jpg)
We also ran a 4mm armoured cable under the path into our garage ready for re-wiring:
![HofKtNK.jpg](https://i.imgur.com/HofKtNK.jpg)
I also added a shelf:
![wsFF0VI.jpg](https://i.imgur.com/wsFF0VI.jpg)