I'm running 1.5mm and 2.5mm cables for lighting and sockets in my loft conversion and wanted to double check what I'm doing is correct. The lighting and power supply cables have already been run from the consumer unit on ground floor into the loft. Lights will be on loop and sockets on ring.
Have attached a diagram showing lighting and socket wiring.
The brown lines are floor joists in the sockets diagram and dormer roof joists in the lighting diagram.
Are my diagrams correct?
Have attached a diagram showing lighting and socket wiring.
The brown lines are floor joists in the sockets diagram and dormer roof joists in the lighting diagram.
Are my diagrams correct?