Hi all,
So now comes my first real predicament in the man cave/shed build.
I put roof timbers in at 600mm centres with no noggins.
I now have the predicament of the ceiling finish. I will be putting in a VCL and then covering but I can't decide plasterboard over timber.. final finish aside, which is less likely to bow under its own weight.
Looking into it if I go the PB route I should be using 15mm board.. unsure of the timber requirements.
Any ideas would be really helpful.
Ben
![20201207_152735.jpg 20201207_152735.jpg](https://cdn.diynot.com/data/attachments/214/214114-f8120003603e3e0f3b3c36a640dbd05a.jpg)
So now comes my first real predicament in the man cave/shed build.
I put roof timbers in at 600mm centres with no noggins.
I now have the predicament of the ceiling finish. I will be putting in a VCL and then covering but I can't decide plasterboard over timber.. final finish aside, which is less likely to bow under its own weight.
Looking into it if I go the PB route I should be using 15mm board.. unsure of the timber requirements.
Any ideas would be really helpful.
Ben
![20201207_152735.jpg 20201207_152735.jpg](https://cdn.diynot.com/data/attachments/214/214114-f8120003603e3e0f3b3c36a640dbd05a.jpg)