DIPLOMAT ACA9102

[Gena]

My Diplomat ACA9102 has 6 lights flashing on the left and bleeps 10 times with a break and 10x again etc. Only had installed yesterday.
I'm not sure how to reset. Booklet says: 'To change the cycle currently underway, open the door carefully. Press and hold the programme select utton for about 5 seconds. Once the cycle has been cancelled, the dishwasher will emit a short beep and the relative indicaor light will turn off.' Tried this numerous times and no good.
Can anyone tell me what's going on with a brand new machine?
How can I 'reboot' or 'reset' please?

 

[Gena]

MFI says:
Turn off at wall and pull out plug for 1 hour with door shut
Dishwasher power on with door open
Press 'P' 4 times within 3 seconds of dishwasher power on
Shut door and leave for 1 hour cycle - do not interrupt cycle!
Hope this works and may help other Diplomat users!

 

[Glenwood]

My Diplomat ACA9102 has 6 lights flashing on the left and bleeps 10 times with a break and 10x again etc. Only had installed yesterday.
I'm not sure how to reset. Booklet says: 'To change the cycle currently underway, open the door carefully. Press and hold the programme select utton for about 5 seconds. Once the cycle has been cancelled, the dishwasher will emit a short beep and the relative indicaor light will turn off.' Tried this numerous times and no good.
Can anyone tell me what's going on with a brand new machine?
How can I 'reboot' or 'reset' please?

did you sort it out i have the same problem

 

[Glenwood]

Did you sort your problem out, if you did then please let me know.