Hi Guys,
Any suggestions would be appreciated as I am trying to sort a programming issue via wintex.
When I set the alarm, by default, Area A - Internal & Area B - external arm.
When I unset the alarm, by default, Area A - Internal & Area B - external disarm.
The situation arises...
That's the thing, I am unsure what caused it, but the 8xp(w) has just been added to the system. It is possible that the fault may have been there upon introduction. I am wondering if there could be a bug in the software as I reset as suggested and it hasn't come back.
Thanks ever so much for coming back to me on this... Its a little to late to experiment tonight but I will let you know how I get on thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :D :D :D :D
I have checked via wintex diagnostic and the 8xpw lid tamper icon is shown as closed and the radio rx tamper icon is illuminated. I am only using the 8xpw system as an add on for radio remote function at the moment so all zones are secure as no further devices are installed. Is there a way of...
Guys, just researching the 17ah batteries... How are you pro's connecting these into the metal housing texecom panels. I was looking to connect a yuasa 17ah but the terminal connections are the threaded m5 bolts... Don't really want to cut and bodge in any silly eye terminals... Does anyone know...
Hi,
Looking to replace a battery in the elite 24 panel to extend run time on power outage. The existing battery is 1 x 7ah and it charges with the 300ma jumper selected. The system is running at the upper threshold on the current draw side of things so couldn't really amend jumper to 750ma...
Thanks for your reply... I am hoping you may have resolved this for me... Dial all numbers is not ticked. I have just referred to the manual and it say's...
A - Dial All Numbers
If the communicator is acknowledged by the first ARC, it will continue to dial any other programmed ARC. This is...