thanks, I get the not being able to visualise but the info is great for helping me figure out what to do.
I had it on the jam at first but had moved it a few times trying to combat an initial install issue that turned out to be the metal curtain rod and just never moved it back so I'll give...
in this case it's a back door behind with enclosed gates which are set to burglar, the entry is purely there for forgetting the alarm is on when going to the shed rather than entering the property.
Dan
thanks for your help.
yes, id be able to hear the count down as its not strictly an entry point as the gate is on burgler so the count down is purely for forgetting to disarm and has worked in the past, just more unreliable when the door is opened quickly. on this particular occasion my wife...
Quite simply I have the patio sliding door set to entry and the side covered gate set to burgler and a few times when ive been late, the first to leave and forgotten to disarm ive flung open the patio door and then set the whole alarm off going through the side gate which means I got there with...
Hi,
I'm using the HSA6300 which I initially put up in haste a year ago due to some goings on in the area and its done its job in that (thankfully) there has been no incident yet everytime we've forgotten about the alarm we've managed to inadvertantly set it off.
The HSA6021 PIR detecting...
Hi,
Hope someone can help, I've got E168 but only when I use the central heating. The radiator light comes on but not the orange 'flame' light.
If I do a reset an use hot water the pipe light comes and as does the orange flame light and all seems well - then use the heating and we are E168...
vertically was where it was initially (near the top and therefore the curtain rail) and still had the problem, i did have it low for have a day but my toddler seemed intent on pushing the test button and fiddling :)
i can live with it there and will replace the rail with a wood counter part...
ok, can chalk another one up to use error :oops:
as much as i didn't think the curtain rail would effect it..... that was the problem :mrgreen:
thanks all
dan
ha! yes - i knew that would be mentioned when i took the pic. i had thought about it and going to do it today on the hope it does fix it - although it shouldn't have affected its previous 2 locations and isn't much of a conductor... but all good advice - here comes the wrath of the wife for...
Hi
thanks for your reply (i would have replied sooner but the forum doesnt allow logging in from an iphone).
i've tried swapping the sensor from a working door and the problem stays with my upvc sliding door unfortunately so that rules out the sensor itself.
ive tried it both on the...
Hi,
Struggling a bit with this as just recently after perfect operation 1 out of the 4 door sensors on my Yale 6400 only intermittently reads on the walk test/triggering the alarm.
I've used the test button on the sensor itself which appears to work perfectly and i can hear the slight...