Recent content by Axum

Yep, cut a bit off the brown wire and used that and it's all working, thanks again.

Sorry guys, me again! I've only got this cable, will this do ?

Thanks again :)

Thanks for the prompt responses guys, got there in the end! Appreciate your help.

See, i'm confused and i don't know what i'm doing, and you two have just contradicted each other.. Brown wire in 1 Connect 2.5mm wire from 2 to 3 Blue wire in 4 Black wire in 5 Red wire in 6

Hi, sorry, you've put 4 in twice, hence my confusion...

Sorry, here's a better pic : http://www.arunlisa.plus.com/heater/Image00003.jpg So basically : Red into 6 Black into 5 Brown into 4 Blue into 3 Then i need a little bit of 2.5mm cable to join 2 & 3 together ?

I'm a complete novice so bear with me.. I'm assuming Red is live, and black is neutral, so red wire goes into hole 6, black goes into hole 5. Then where do the brown and blue go into ? I am right in thinking that the 2 greens, as they are already connected to the metal plate (with an E...

If it helps at all, here's the actual switch i have : http://www.tlc-direct.co.uk/Products/SMFST17.html and the instruction booklet (which isn't actually helping me a great deal) is here : http://www.tlc-direct.co.uk/Technical/DataSheets/Smiths/FST11.pdf

Hi all, Got a fused timer for my immersion heater. I've just taken the existing switch off the wall and i've got a bit confused. Below are 2 photos : Existing Switch and connections : Back of my new timer : I think the dark green and the light green wires should go into...

Thanks again.

Well i've found the receipt for the first timer. I just think that other one is going to save me hassle. It should replace the switch on thw wall directly shouldn't it ? That means i don't have to drill the timer into the wall, buy a new length of cable, and have 2 sets of cables running...

Really appreciate the answers guys, really helps me a lot. Just to confirm : Take the wire out of the existing switch Feed that wire into the timer (thus connecting the heater and timer) Get new 1.5mm wire and connect the timer and the switch together I think that's it ? There is a...

Current wall-switch : Purchased Timer :

bear with me, i should have a picture shortly...