Recent content by biggee

thanks mate checked that what about the mixer module?

hi guys, i have a mains pressure system in my home all of the taps are mixer taps(except for the garden) in my downstairs bathroom the hot water does not come out of the tap at all, all other taps inc shower function normally, pressure is at 1.5 bar. any ideas? its a bristran...

hi guys, i have a servis m6702, that has lasted me well, recently i replaced the pump, no probs there. I have a new problem, it tripped out the circuit breaker, so i investigated further...... opened the top and saw the power transformer had some soot on it, managed to get a working one so...

7 possible connections and 5 wires, am i missing something? does it matter which N and earth connections are made on the block of 3 and 4, if i follow your instructions i have a n and e on the block of 3 and the same on the block of 4.

Thanks Heatingman, nice one. Corgiman, you are absolutely right, what a bell end I am.

Does anyone have a dpf of the installers manual please?

Hi i have a baxi solo pfl50 boiler(boo!) It had the overheat problem (boooooo) I purchased a new PCB(horray) removed my old one(hmmmm) plugged it in(ok) forgot which electricity supply wires go where on the PCB(doh) please can anyone help? I am faced with 7 possible points to connect...

OK stupid question time, Zone valve? i thought that the pump ran on for a while to cool it down? valve by the hot water tank?

Hi all why does the overheat pcb fault occur, what can be done to remedy it? I have to purchase another board bu ti really would like this time to be the last.

please could you tell me more?

:? my fault entirely, i had posted another topic on the pcb overheat problem and got the two posts mixed up. Why do the baxi solo pcb's develop the overheat light fault?

why do they do that?

def no leaks or probs above or to the side of flue exit point. engineer said not to re position flue (same one who installed it). Apart from that the dreaded overheat problem on the PCB still reoccurs 3rd pcb now.

yes its sealed with cement, i replaced the PCB again and ther bloody rain has caused the same problem. WTF!