Recent content by brianp9

Not sure that there is an inbuilt fuse on this - found the fault with my lights was caused by a poor connection between the bulb and holder

This is after the lamona wine cooler packed in after 13 months after the lamona washer dryer stopped drying after 12 months and next - and probably not last as previously shown faulty lamona cooker hood ! see a pattern here ? ah well lesson learned

must have been on drugs - :D

ok - found the problem - damn bulb holders not connecting internally - must have been the contacts - what a pile of C**p thanks for the reply btw Brian

cheers for that not a bad idea - just annoying as to why !! :?

had this extractor for a few years - just recently both lights stopped working - fans ok changed bulbs ofcourse - had a look at the switch no obvious tracks burned on pcb and lamp on/off button on switch is working Have no idea what this could be - anybody had similar issue It's headin...

had this extractor for a few years - just recently both lights stopped working - fans ok changed bulbs ofcourse - had a look at the switch no obvious tracks burned on pcb and lamp on/off button on switch is working Have no idea what this could be - anybody had similar issue It's...

Hi all - was upgrading formware on this tv via usb and had a power cut - now goes to standby but won't power up - no picture or sound tried re-installing again but doesn't work - any ideas ? thought might be either the power board or the controller board or both ?

just an update - tripped again - howdens engineer replaced duct and fan - seems the fan wasn't complete in the channel - ok now !

hi - Howdens offered a replacement cooler - thanks for the help guys !

yes thanks - gonna try and look at that first - any idea if it's ok to isolate the hot water supply to the boiler at the boiler inlet so i can have a look at the tap - theres an off valve there - presumably i can just turn that off and fix the tap ? reason being if i turn the water supply...

Hello all - Had this installed via warmfront about 3 years ago. Only problem is in the last few months the bathroom sink hot water tap is just a trickle when first turned on. It gradually gets a bit better after a few on and off turns and is getting hot as required. Everything else on the...

hi zipper - got and installed the replacement as suggested it was a different part number than the old one and fits perfect - washer on it's third test run now and it's drying fine ! thanks for the advice and parts info - v much appreciated ! :lol:

mmmmmmmmm !

Had it to bits can't see anything obvious ! Just gonna keep it as a very expensive red wine rack either that or smash it in to tiny pieces but i'll have a very big gap in me kitchen - don't drink wine meself it's the missus - so i'm happy savin the lecky anyway - never quite sure what was...