Recent content by elmag28

JohnD... Thanks for identifying the lock. I didn't measure the thickness. I will take it out & measure it. I will go through the options you mentioned & get back to you. Many thanks

Hi, I will be grateful for your help in trying to replace an old front door mortice lock. There are no markings on the lock & it measures 149mm/ 6 inches but the bracket is about 40 mm. Ones I can see online have a backset if around 51-52 mm. I am attaching the pictures of the lock with...

Please find attached the pictures of the flush valve. There's bit of limescale on the bottom part. Thanks for your prompt reply.

Dear all, The fluidmaster toilet is continuously leaking into the toilet pan. The push button is completely floppy and has no resistance. I removed the lid and it seems the inlet valve is letting water in continuously but it does not reach the outflow pipe but is about an inch high. Am I right...

Hi, We have a lean to Everlite Enduro which has sagged and is now leaking between the panels. The size is 4600mm wide and 2370mm projection from the house wall. The end caps were broken and the bars had slipped. I ordered end caps but the panels ends have become very brittle. I was planning to...

Thanks I will have a look at the Texecom.

My intention was not at all to waste their time. I would have got them to do the job but the quotes were pretty steep. I did mention the existing setup on phone & was told they will have a look and then quote.

Dear All, We inherited a Aj600n at our house. It has wired magnetic contacts to the doors but no PIRs. It also has wired sounder to the front of the house. I had a couple of quotes of one which suggested a HKC wireless system. Another suggested a Visionic wireless or Texecom excel wired panel...