Recent content by Filby1

so wago and J boxes not ok then ?

Thats a different metohd, Im not keen on that method there then seams to be too much wire in each fitting

Having seen the speed of these wagos, im looking into them, i was however going to use the junction box method as all the floor boards are up and i have easy access to the lost to lay wires. so in a junction box method where you have in and out loop to the next box switch and light fitting...

Hahah there not alleged there really there: On another note: TLC sell Heat resistant cable: http://www.tlc-direct.co.uk/Products/CA4TQ3slash50.html?source=adwords&kw={keyword}&gclid=CLPgvILnrKcCFUtC4QodZHxdAg its only 4mm but rated to 35Amps, I would be ok to run to lengths from a...

Ur gona like this even more all the wires come out of junction boxes screwed to beams and run directly under a leaking shower tray. however did the job is a total idiot, i have only had the house 4 weeks

Yeah i know mate and its not even my job and i know its wrong, theres bloody 2 x 6 amp breakers in there too. Got the Gromit's there a given and thought ahead with the 47 mm boxes Earth sleeve is missing as of today but i know i should have it il admit that one

Can i just say after being a little unsure to begin with about this whole thing. Im now sure and thanks again, i can turn my hand to most things and in the beginning i felt some of you guys was taking the ****, when all i wanted was help. Anyhow i now think i know and understand what i am...

I will look into both options, il get the parts first, at least try not to get the added extra you Sparkys put on things haha. These Fancy RCBO's sound like a sound invention I really wil be having it looked at if i was to do the work trust me, but i would still want a double check even if...

Yeah thats it i found them, Going to ditch the switch+socket. Il buy an Mk switch 45Amp, just a switch. Simple now then. RCBO>>>45 Amp Switch>>>>>Connector Unit from here to Oven in 6mm if i can 4mm if not and Hob in 6mm job done and safe. Then i will get the Sparky in to sign the...

Great stuff, no neither the hob or oven have cables Oh i can only find a 30amp RCBO by wylex will that work or is it too small

So either way is right..? Oh and thanks for the RCO advice. I can understand either way, the Control unit under the surface takes both wires from the Oven 6mm for hob maybe 6 or 4mm for the Oven then from here another cable 6mm goes back up into the cooker Outlet in the rear of the MK...

Another can of worms ? Why?

So then everything would be behind the cooker with no Switch? if this is ok this would be great, no unsightly switch on the surface. So this setup would be: Consumer unit in 10mm into "88516" then wire from "88516" 6mm to the next box witch would be a FCU and then from there 6mm to the...

Cool, its going as i thought it would, No say if it does have a socket and the MK one i has does i would never use it, i have no need i have plenty of RCD protected sockets in the Kitchen 3 doubles on an RCD ring. So a 32 amp rcbo it is then, double safe, and the 6mm cable from double outlet...

I was going to put the CCU right on the wall, it does have a Socket but i aint gona use it so see is this sounds ok.. Consumer unit to CCU in 10mm T&E out the CCU to Dual appliance plate then out the bottom of the Plate to the Hob and the Other side to FCU and then onto the Oven. This...