Recent content by GoingHome

Many thanks for the replies guys. I have only installed a few Premiers (including my own) before I retired (retirement, you know,- eight hours a day, seven days a week to do what you want.........dream on!) and this was the only Veritas I've done. Programming was so easy and straight forward...

Installed a Veritas six months ago for a friend (yes, I know, I should have known better) and everything has been fine since. He came to set it yesterday and was presented with the keypad display: ' Code accepted. Enter Command'. Resetting takes it back to disarmed but subsequent code inputs...

Yes, forty odd years of alarm use I'm with you on the luxury of a 'ready' light - never had one before. My main concern was that it was a sympton of something more important possibly. However, all is now well and Handymanjo's prompt about programming in his reply got me digging into Premier's...

Many thanks for the reply. As well as going through a zone status check immediately after programming and commissioning, I have done that again and each zone comes up with spot on resistor values for both active and secure states. The system sets fine each time (both part and full) without the...

As my 20+ year old Captivate 20’s keypad was coming to the end of its days I decided to replaced the system with a Texecom Premier 24 with one 8XP expander and one LCD/L keypad. Each zone is eol except a p.a. which is n/c (two p.a. buttons in series on one zone). Installation and commissioning...