Thanx m8 for all your help. All working now :) thermostat terminal SL was not making contact, had to push it down to make it sit properly.
once again many thanx m8.
hi m8
Having bit of a problem with the above steup.
When i press the programmer to ON mode, the thermostat lights up but the boiler does not fire the burners, you can hear the fan working. Even if the programmer is in on or off mode and i rotate the thermostat nothing happens. Any pointers...
thanx for the help m8
i have the following Glo-Warm RT200 Electronic Room Thermostat. ( http://www.plumbworld.co.uk/glowarm-rt200-electronic-1932-17049 ) The wiring diagram is http://www.plumbworld.co.uk/link/12/pwsc0008wiring.gif
just want clarify the wiring connections with you before...
hi m8,
yes i will install a standard room thermostat. Looking on p.21 from the electrical connection from the boiler manual. One diagram shows the external clock setup with a room and frost thermostat connected, is this the setup you refering to ? In my case i will ignore the frost thermostat.
My glow worm compact 100e combi boiler does not have a clock timer and is a real pain during winter. I have tryed to source one but as the boiler is obsolete, the parts are very expensive. But I do have a salus ep200 programer clock, can i fit this externally so i can control Central heating...
I'm looking to replace my olds radiators and came across a company called AIRFEL. Compared to other manufactures (Stelrad,Quinn barlo etc..) Airfel rads are cheaper by 10%. Has anyone had any experience with these ? how do they perform ? They also state 12 years gurantee on their rads.
Thanks...
I was made redundant from work in last month, so the property will be letted out for a year or so until i get my finances in order; But when i do move in i want to have a fireplace installed. I was told by the housing agency that tentants tend to moan about draught comming from fireplaces that...
thanx for the tip m8, never knew that. You learn something new each day :D With regards to air brick, i will be cutting a hole in the plasterboard at the bottom and fit a plastic ventilation grill. I don't fancy bricking it up as i know one day i will have to remove it and with plasterboard its...
Can someone please advise me on how to go about plastering around a fireplace. I am looking to temporarily block my fireplace with plasterboard and have it skimmed over. My problem is that there are few bricks on the sides of the fireplace opening and a fireback sticking out from the wall by a...