Recent content by ICETER

hi lads, i was called out today to fix a pump on a ideal mini,found it to be knackered so i ordered a new one but when i got home i had an older ideal mini with wilo pump in it,was wondering if it would work,the one i need is a wilo class f pm6 tf95 ip44 and the one i have is a wilo...

think alex is rite,but if you google unipipe there website comes up and in ireland they are still called unipipe but supply the uponor materials

in ireland a crowd called unipipe supply these,but nearly certain it is uponor

lads have a bit of a problem,got called out today on an ariston combi 38 he,the problem was the boiler was getting to temperature really quick but not distributing heat it is then dropping like a stone and kicking back in,it was going to first couple of rads but thats it but the return to boiler...

any suggestions

lads, a costumer just rang me there saying that her oneof these comes on grand in the morning and heats rads but when it reaches temperature boiler goes off and doesnt re-ignite until the boiler has fully cooled but pump is continuing to run all the time it will then kick back in itself...

venturi

make sure there is a bypass on the system,it could be the pump or flue thermistor

lads just an update on the boiler,first off thanks for your replys,i went with my instincts and changed the ignition pcb and it worked,thanks again

lads, having a problem with one of these i turn the power on and pump runs,there is power to the fan but only 130v,there is no power on number 8 to the ignition pcb but there is a clicking noise coming from it,sometimes the boiler actually just comes to life and works maybe once a day if...

is there any chance it could be the pump?i checked it and it ran freely but the boiler had been sat up for the summer

water pressure is fine 1.5 bar

lads, looking for a bit of help here,i was looking at an icos for a friend of mine that keeps flashing l9,system is filled correctly and vented and all isolation valves are open,pump seems to be turning fine as i opened it and turned the screw on it and it turned freely,boiler will...

thanks for reply,i was just suspicious as to whether it would pump as far as i want or would it just evetually creep in?

hey lads, i am currently installing a viessmann vitodens 100 35kw system boiler,my question is the boiler is 20metres away from the furthest rad as this is the only place it can go,the boiler is downstairs in a boarding school but is feeding an upstairs apartment,but is the pump...