On the copper tank in the airing cupboard is a Satchwell dial that goes from 40 to 90 (i have it set on 40 ) the cable that goes from it to the wiring box is a grey flat type 10mmx 5mm it has been there since the house was built but in order to tidy it away i need a longer cable could you tell...
When i flush the cistern it fills up and then it drips very slowly if the cistern is not flushed it would come out the overflow (this would take days )i have fitted a new diaphragm but still drips . thanks for any ideas
I have a Glow.worm 24hxi and a Danfloss programer CP71SI In the winter i had no problems but now i only need hot water i find i can only get hot water with the heating on and the thermostat turned up to turn the heating on . Tried temporary override buttons but cannot get just hot water or any...
In the kitchen there is a boiler above it in the airing cupboard next to the hot water tank is a metal box on the wall 4 1/4"x 5 1/4" marked Stachwell Sunvac there is a relay+ 5 amp fuse and a board. Below it on the pipe is a small metal box marked Douval says domestic water with arrow pointing...