Recent content by rednev

No, it looks like this. The large number is the room temperature, the smaller text line under it shows the desired temperature. When you turn the knob to increase or decrease the deired temperature, it goes to a different screen showing clearly what you are setting it to.

Vaillant VRT 350F wireless thermostat showing incorrect lower room temp We have a Vaillant VRT 350F wireless thermostat. Its started to display a much lower room temperature than it should (we have used a traditional room thermomitor in the same spot). Hence making the heating work as we want...

Just wondering how that kit will work on taps that already have a shroud. I contacted one retailer that sells it and they say you just dont use the shroud supplied... but I cant see how that works... or am I being stupid?

We have a Vailant 831plus eco tec combi boiler in a bungalow, so don't have a loft tank. All cold water to taps in bathroom and kitchen are fed from the mains.

Just found the item I was on about regards quick release tap fitting for all types of taps. https://www.ukbathroomstore.co.uk/aquarius-easy-fit-bath-fixings?gclid=CK2Eqp-G3MoCFQQewwod6gkF9A Would that work on the taps I have my eye on: Bristan Orta Bath Filler Tap

Had a quick Google about the Bristan Easyfit range and a fair few have popped off and caused flooding. Not sure ill risk that version of what im after.... any idea of the generic one I saw?

Cheers guys, have heard good things about Bristan brand, so looks like they may be the ones to look at. With regards to the Easyfit thing you mention...the thing I was was like that but more of a universal fitting for most taps... rather than for Bristan only

Getting a new bath fitted soon and need to order a bath waste and plug set to be fitted. Ive seen many modern bathrooms have pop up bath plugs, however i have my concerns that these may have issues if hair is allowed down them and they cant be cleaned / maintained. Something like this...

On the look out for some new taps to got with a new corner bath we are getting installed. Ive done a bit of research and it seems that many that can be bought online can be cheap rubbish sold at high prices. Im wondering if you guys (and ladies :) ) may be able to recommend me some brands to...

Thanks... I may give that one a go and save £70 :) Just called Trojan, and they confirmed that the Moods are someone they deal with, and Supercast = Trojancast. Thanks again for all your advice really been appreciated.

I see Trojan's reinforcing treatment is called Trojancast. Cheapest Ive been able to find the reinforced version is Bathroomsupastore with the panel and delivery it comes to £368.99. However, Ive also spotted another bath that shares the Orlando model name, its by a brand called Moods /...

Brilliant, thanks so much for your help

ok great. Thanks for helping. If you get that picture id like to see it. :)

It is already in place attached to the ceiling (as shown in the current setup diagram above). Just measured floor to ceiling its 2320mm. When the new corner bath is installed it wont be directly above the floor as the bath will be underneath it. Hope this makes sense?

We are in the process of getting a new bath. it will be a choice of a corner bath or a P/B shaped one. If we get a corner bath, the current pull cord switch for our electric shower will be inside the shower area of the bath very slightly. Will this be legal and safe? See diagram below...